Frequently asked questions
Is my unit still under warranty?
All Cardo units come with a 2-year warranty, starting from the date of purchase. Please keep your proof of purchase in order to reclaim your warranty. Your first point of warranty service is your dealer.
How can I improve my sound quality?
Sound quality is best when the speakers are placed directly opposite your ear canal. Verify that the speakers are correctly placed inside your helmet by following the next steps. 1. With the helmet on, slide your finger inside the helmet and press against the side of the helmet where your ear is. This is where the speakers should be positioned. 2. Remove the helmet, but keep your finger in that spot. Check to make sure the speakers are in this position. 3. Make sure the speakers are positioned as close to your ear as possible so you can feel them. If necessary, use the included Velcro booster pads behind the speakers to get them closer to your ear. 4. Since every head is different, you may find that your helmet ear cavities are not placed optimally. If this is the case consider placing the speakers outside your helmet ear cavities right opposite your ears.
How can I get more riding time out of my battery?
Your product comes with a Charge while riding feature that allows you to plug in the unit into the bike's 12V charger or a power bank, and continue riding long after the standard battery time has passed. In order to do it, just plug your unit into the power source – the unit will shut down. Turn it back on again and you're set.
Which mobile app do I need to download for my device?
For PACTALK, PACTALK Bold, PACTALK Slim, SMARTPACK, SMARTH, FREECOM 1, FREECOM 2, and FREECOM 4 – you should get the new Cardo connect app (please note that in order to fully enjoy it's capabilities, you would need to upgrade your unit's firmware to the latest version. For Qz, Q1, Q3, G9, G9x, SRC V1.1, SRC Pro, Louis special edition, and SHO-1 – you should get the Cardo Smartset app (the Qz, Q1, G9 and SRC are only supported in Android).
How do I make sure that my unit's battery lasts as long as possible?
We recommend not to leave your unit unused or in storage for more than 3 months without charging. Be sure to plug your unit at least once every 3 months for full 4 hours to ensure maximum battery life.
Is it possible to use it with my own earbuds / speakers?
While your unit comes right out of the box with one of the best set of speakers in the business, you can always plug in your favorite earbuds or aftermarket speakers via the standard 3.5mm jack and ride on.
How can I get more range of intercom out of my unit?
The range stated in the product description has been tested in optimal conditions. Actual range performance could be adversely affected by a number of environmental factors: 1. Riding environment (urban/non urban) 2. Topography 3. High voltage power lines and cellular towers 4. Line of sight
Friends tell me my voice doesn’t come out clear. What can I do?
If you are using a boom mic, make sure your mic is as close to your mouth as possible. Search for the small yellow triangle near the boom and make sure it faces your mouth. If the issue is noise from wind turbulence, put a larger mic sponge on the mic to help reduce it. The larger sponge is included in your package accessories. If you cannot find it you can purchase it as part of a replacement microphone.
The unit doesn't seem to be charging or the Battery seems to not last as long as it should
Plug in your unit to the charger and leave it charging for at least 4 hours straight. If this does not work, try using a different wall charger and USB cable. If the unit still doesn’t charge, please contact support. DO NOT attempt to disassemble or replace the battery on your own. DO NOT open the unit. It will no longer be waterproof! If your unit is out of warranty, you can find replacement batteries on 3rd party’s websites and in specialty electronics retailers. That said, we DO NOT recommend replacing parts on your own, for risk of water, dirt and general electronics damage.
VOX based voice commands are hard to activate
Please note the VOX based voice commands on PACKTALK, SMARTPACK, and SMARTH are only supported in Bluetooth intercom mode (LED flashes Blue ), please refer to the manual for further details). Please make sure that VOX is enabled and set to the correct sensitivity by shouting or blowing into the mic – it should activate a loud beep. In case it doesn't, please use the mobile app or Cardo community to set VOX to "enabled" and VOX sensitivity to "high". In case you do hear a loud beep make sure that you say the correct phrase exactly as described in the user manual in quick succession of the beep.
Unit not recognized by the Cardo community or can't update SW while unit is recognized.
1. Stop all running firewalls and anti-virus programs. 2. Start Google Chrome. 3. Login to http://community1.cardosystems.com/signup# 4. Plug in your Cardo device, ensuring your unit is turned off. LED should light in red. 5. Run Cardo Updater (install if not installed yet). 6. As soon as your unit has been recognized, Click on the SW update button. If at any time during the firmware upgrade, the Cardo updater stops, this would result in a code #D02 error. Should that happen, proceed with the following 1. Disconnect the unit from the computer 2. Wait 5 seconds and reconnect it 3. Click ok on the error message – this will restart the process In case you see the #D02 error again, proceed with the following: • In your computer's task list, shut down the Cardo Updater • Restart Google Chrome • Repeat the process At this point, if you still can’t upgrade the FW, please try using a different USB cable or a different Computer.
Mobile app doesn't recognize unit. What next?
First, make sure that you are using the correct app – we have two different apps available for different product lines. If the issue is unresolved, make sure your smartphone is paired via Bluetooth and connected to the unit. Using a Smartwatch? Try turning it off before starting the app, and only then turn the smartwatch back on. If all above does not solve the issue, proceed with the following: 1. Delete the application from your phone 2. Delete the unit from the paired devices list in the phone's Bluetooth settings page 3. Restart the phone 4. Perform pairing (or factory) reset on the unit (as described in the troubleshooting section in the user manual) – the unit will turn off 5. Turn the unit back on 6. Pair the unit to the phone via Bluetooth 7. Download and install the app 8. Start the app If it still doesn’t connect, turn off your unit with the app running and switch it back on.
Connectivity to Smart dashboard, bike infotainment and GPS devices
In order to enjoy the best experience when using a smart system in parallel to a mobile phone we recommend connecting the unit in one of the 2 ways described below: 1. Use a latest model Bluetooth 5.0 equipped smartphone with a capability to be connected to 2 different devices. Connect your smartphone to both the bike system and the Cardo unit directly. 2. For all others, bypass the smart dashboard system by connecting both phone and the bike system directly to the Cardo unit (one on each channel) without connecting the phone to the bike system.
How to use with a Smartwatch?
Try turning it off before starting the app, and only then turn the smartwatch back on. If the above does not solve the issue, proceed with the following: 1. Delete the application from your phone 2. Delete the unit from the paired devices list in the phone's Bluetooth settings page 3. Restart the phone 4. Perform pairing (or factory) reset on the unit (as described in the troubleshooting section in the user manual) – the unit will turn off 5. Turn the unit back on 6. Pair the unit to the phone via Bluetooth 7. Download and install the app 8. Start the app If it still doesn’t connect, turn off your unit with the app running and switch it back on.
Posso condividere musica con qualsiasi altra unità Cardo?
Puoi condividere la musica con qualsiasi unità Cardo della stessa generazione: G-line, Q-line, SRC-line, SHO-1. La tua unità non sarà in grado di condividere musica con prodotti di generazioni precedenti (PACKTALK EDGE, PACKTALK NEO, PACKTALK CUSTOM, FREECOM 4X, FREECOM FRC2x, Spirit HD, Spirit, PACKTALK Bold/Black/Slim/Ducati/Louis, PACKTALK, SMARTPACK, SMARTH, FREECOM 2/4/1+/2+/4+).
Q3 spare parts & accessories
Large Hybrid Boom Microph...
Large Hybrid Boom Microphone Sponge (Replacement part).
E-mail when Stock is available
Q3 Replacement Module
Head unit only. No audiokit
E-mail when Stock is available
SMALL HYBRID BOOM MICROPH...
Small Hybrid Boom Microphone Sponge (Replacement part).
Speaker Repositioning Ear...
A pair of velcro relocator pads for speakers. Places speakers closer to ears, improving volume level & sound quality.
SQUARE VELCRO (PAIR)
A pair of Velcro square female for speaker/mic.
Hai ancora una domanda?
Ottieni assistenza telefonicamente o tramite modulo per qualsiasi richiesta tu possa avere.
Nota: se non riesci ad aggiornare Cardo Update all'ultima versione, prova a scaricarlo direttamente dal nostro sito Web QUI
Contatta l'assistenza Cardo
Contattaci via email e riceverai la risposta in 2 giorni lavorativi.