ZUM WARENKORB HINZUGEFÜGT 
Extraflaches Design
Dank des aerodynamischen und 16mm flachen Designs sehen andere Bluetooth-Headsets neben FREECOM 1+ blass aus.
Alles was Sie brauchen, um ans Ziel zu navigieren und Ihre Erledigungen zu machen
Radio, Musik, GPS, App und die neueste Bluetooth-Technologie immer mit dabei. FREECOM 1+ ist ein Kommunikationssystem für Einzelbiker und Biker mit Beifahrer, auf das Sie nicht mehr verzichten möchten. Alles was Sie brauchen zu einem erschwinglichen Preis.
Nach der Anfangskonfiguration ist das Gerät stets einsatzbereit.
Egal welche Kräfte auf das Gerät einwirken, Ihr IP67-wasserdichtes FREECOM 1+ nimmt alle Widrigkeiten souverän auf und Sie bleiben in Verbindung. Egal ob Regen, Hitze, Schlamm, Staub oder Schnee.
ENTDECKEN FREECOM 1+
1
2
3
4
5
6
1
IP67 wasserdichtes, extra flaches Gehäuse.
2
Volle Verbindungskompatibilität mit Telefon und GPS.
3
Integriertes FM-Radio mit RDS.
4
Immersiver Sound.
5
Unterwegs laden
6
Fahrer-zu-Beifahrer Intercom.
SOUND
Beim Biken die Lieblingsmusik vom Smartphone hören ist schon toll, aber dabei auch den/die Mitfahrer/in mithören lassen (music sharing), ist Spitze..
TELEFON
Anrufe entgegennehmen, tätigen und Mobilgeräte mit nur einem Finger oder über Sprachbefehl steuern. Deine Gesprächspartner werden es kaum glauben, daß sie mit Dir beim Biken plaudern.
IMMERSIVER SOUND
40mm flache Lautsprecher und erweiterter Prozessor
AUTOMATISCHE LAUTSTÄRKENREGELUNG
Die Lautstärke wird automatisch auf die Umgebungsgeräusche angepasst. Genieße z.B den vollen Klang von Vivaldi bei hoher Autobahngeschwindigkeit und gedämpftes Audio wenn Du an der Ampel wartest.
2-WEGE-INTERCOM
Mit dem Kurzbereich-Intercom für Fahrer-zu-Beifahrer bleibst Du immer in Verbindung. Beim Erwerb einer Doppelbox, sind die Geräte bereits ab Werk gekoppelt.
AERODYNAMISCHES DESIGN
Unsere Geräte gehören zu den flachsten Kommunikationssystemen für Biker. Nur 6.5 mm!
AUDIO TEILEN
Auch dein Beifahrer kann bei deiner Playliste oder beim Empfang vom Radiosender mithören. Gemeinsam Musik geniessen ist fast so schon wir gemeinsam Biken.
UNTERWEGS LADEN
Aufladen total verschwitzt? Niedriger Akkustand? Schließe das Gerät einfach an eine externe Energiequelle oder an das 12V Ladegerät an und schalte es dann erneut ein. Das Gerät wird während der Fahrt geladen.
UKW-RADIO
Integriertes UKW-RADIO mit RDS, damit das stärkste Signal automatisch ausgewählt wird, egal ob in der Stadt oder mitten im Nirgendwo.
EINE PRAKTISCHE APP
Volle Kontrolle über das Gerät über eine einfache und intuitive App. Einfach Cardo Connect herunterladen und dann die Vorteile geniessen.
UNIVERSELLE KOMPATIBILITÄT
Dein Gerät lässt sich mit praktisch allen Bluetooth-Headsets am Markt verbinden.
ANRUF ZU INTERCOM
Du kannst eingehende Anrufe in ein laufendes Intercom-Gespräch einbinden. Mit dieser Funktion bleiben alle Freunde stets in Reichweite.
MEDIEN
Was ist in der Box?
FREECOM 1+
FREECOM AUDIO-KIT
HYBRID-MIKROFON
KLEBEPLATTE – FREECOM
RECHTECKIGE KLETTBANDPADS
LAUTSPRECHER-BOOSTER
QUADRATISCHE KLETTBANDPADS
USB–Kabel
40mm dünne Lautsprecher
- FREECOM 1+
- FREECOM AUDIO-KIT
- HYBRID-MIKROFON
- KLEBEPLATTE – FREECOM
- RECHTECKIGE KLETTBANDPADS
- LAUTSPRECHER-BOOSTER
- QUADRATISCHE KLETTBANDPADS
- USB–Kabel
- 40mm dünne Lautsprecher
Faq
Can I use this product in the rain?
Sure. All cardo units are IP67 waterproof.
This means you can ride in the rain, and enjoy top communication.
Can it be charged while riding?
Yes. Cardo communication systems can be charged while riding. Simply plug it into the bike's 12V charger or a battery pack. Switch it back on and keep on riding
Is my unit still under warranty?
All Cardo units come with a 2-year warranty, starting from the date of purchase.
Please keep your proof of purchase in order to reclaim your warranty.
Your first point of warranty service is your dealer.
How can I improve my sound quality?
Sound quality is best when the speakers are placed directly opposite your ear canal. Verify that the speakers are correctly placed inside your helmet by following the next steps.
1. With the helmet on, slide your finger inside the helmet and press against the side of the helmet where your ear is. This is where the speakers should be positioned.
2. Remove the helmet, but keep your finger in that spot. Check to make sure the speakers are in this position.
3. Make sure the speakers are positioned as close to your ear as possible so you can feel them. If necessary, use the included Velcro booster pads behind the speakers to get them closer to your ear.
4. Since every head is different, you may find that your helmet ear cavities are not placed optimally. If this is the case consider placing the speakers outside your helmet ear cavities right opposite your ears.
How can I get more riding time out of my battery?
Your product comes with a Charge while riding feature that allows you to plug in the unit into the bike's 12V charger or a power bank, and continue riding long after the standard battery time has passed.
In order to do it, just plug your unit into the power source – the unit will shut down. Turn it back on again and you're set.
Welche mobile App muss ich für mein Gerät herunterladen?
Für PACTALK, PACTALK Bold, PACTALK Slim, SMARTPACK, SMARTH, FREECOM 1, FREECOM 2 und FREECOM 4 sollten Sie die neue „Cardo Connect“-App erwerben (beachten Sie, dass Sie die Firmware der Geräte auf die neueste Version aufrüsten müssen, um die Funktionen voll nutzen zu können. Für Qz, Q1, Q3, G9, G9x, SRC V1.1, SRC Pro, Louis Special Edition und SHO-1 sollten Sie die „Cardo Smartset“-App erwerben (Qz, Q1, G9 und SRC werden nur in Android unterstützt).
How to pair to a non-Cardo headset using universal connectivity (Cardo Gateway)
In order to pair your unit with a non-Cardo headset please do the following:
1. Start intercom pairing on your unit (please refer to your product's pocket guide or user manual on how to do it).
2. Tap the phone button to start Cardo Gateway pairing
3. On the other unit start mobile phone pairing
4. Wait For the paring to complete
How do I make sure that my unit's battery lasts as long as possible?
We recommend not to leave your unit unused or in storage for more than 3 months without charging. Be sure to plug your unit at least once every 3 months for full 4 hours to ensure maximum battery life.
Is it possible to use it with my own earbuds / speakers?
While your unit comes right out of the box with one of the best set of speakers in the business, you can always plug in your favorite earbuds or aftermarket speakers via the standard 3.5mm jack and ride on.
Friends tell me my voice doesn’t come out clear. What can I do?
If you are using a boom mic, make sure your mic is as close to your mouth as possible. Search for the small yellow triangle near the boom and make sure it faces your mouth.
If the issue is noise from wind turbulence, put a larger mic sponge on the mic to help reduce it. The larger sponge is included in your package accessories. If you cannot find it you can purchase it as part of a replacement microphone.
The unit doesn't seem to be charging or the Battery seems to not last as long as it should
Plug in your unit to the charger and leave it charging for at least 4 hours straight.
If this does not work, try using a different wall charger and USB cable.
If the unit still doesn’t charge, please contact support.
DO NOT attempt to disassemble or replace the battery on your own.
DO NOT open the unit. It will no longer be waterproof!
If your unit is out of warranty, you can find replacement batteries on 3rd party’s websites and in specialty electronics retailers. That said, we DO NOT recommend replacing parts on your own, for risk of water, dirt and general electronics damage.
Unit not recognized by the Cardo community or can't update SW while unit is recognized.
1. Stop all running firewalls and anti-virus programs.
2. Start Google Chrome.
3. Login to http://community1.cardosystems.com/signup#
4. Plug in your Cardo device, ensuring your unit is turned off. LED should light in red.
5. Run Cardo Updater (install if not installed yet).
6. As soon as your unit has been recognized, Click on the SW update button.
If at any time during the firmware upgrade, the Cardo updater stops, this would result in a code #D02 error.
Should that happen, proceed with the following
1. Disconnect the unit from the computer
2. Wait 5 seconds and reconnect it
3. Click ok on the error message – this will restart the process
In case you see the #D02 error again, proceed with the following:
• In your computer's task list, shut down the Cardo Updater
• Restart Google Chrome
• Repeat the process
At this point, if you still can’t upgrade the FW, please try using a different USB cable or a different Computer.
Mobile app doesn't recognize unit. What next?
First, make sure that you are using the correct app – we have two different apps available for different product lines.
If the issue is unresolved, make sure your smartphone is paired via Bluetooth and connected to the unit.
Using a Smartwatch?
Try turning it off before starting the app, and only then turn the smartwatch back on.
If all above does not solve the issue, proceed with the following:
1. Delete the application from your phone
2. Delete the unit from the paired devices list in the phone's Bluetooth settings page
3. Restart the phone
4. Perform pairing (or factory) reset on the unit (as described in the troubleshooting section in the user manual) – the unit will turn off
5. Turn the unit back on
6. Pair the unit to the phone via Bluetooth
7. Download and install the app
8. Start the app
If it still doesn’t connect, turn off your unit with the app running and switch it back on.
Connectivity to Smart dashboard, bike infotainment and GPS devices
In order to enjoy the best experience when using a smart system in parallel to a mobile phone we recommend connecting the unit in one of the 2 ways described below:
1. Use a latest model Bluetooth 5.0 equipped smartphone with a capability to be connected to 2 different devices. Connect your smartphone to both the bike system and the Cardo unit directly.
2. For all others, bypass the smart dashboard system by connecting both phone and the bike system directly to the Cardo unit (one on each channel) without connecting the phone to the bike system.
How to use with a Smartwatch?
Try turning it off before starting the app, and only then turn the smartwatch back on.
If the above does not solve the issue, proceed with the following:
1. Delete the application from your phone
2. Delete the unit from the paired devices list in the phone's Bluetooth settings page
3. Restart the phone
4. Perform pairing (or factory) reset on the unit (as described in the troubleshooting section in the user manual) – the unit will turn off
5. Turn the unit back on
6. Pair the unit to the phone via Bluetooth
7. Download and install the app
8. Start the app
If it still doesn’t connect, turn off your unit with the app running and switch it back on.
Will it fit my helmet?
Yes. It can be fitted to virtually any helmet – Full face, dirt-bike, open face, 3/4, modular or half helmet. It would even fit on most ski helmets. For installation on half helmets and ski helmets, you will need to purchase the Boom Microphone Cradle (a.k.a half helmet kit), sold separately.
How to use my Cardo product to with the BRP connect?
Verbinden Sie sich mit NEUEM der Cardo App
Cardo Connect erschließt das volle Potenzial Ihrer PACKTALK- und FREECOM-Geräte. Konfigurieren Sie Ihr Gerät unterwegs und genießen Sie die intuitive Bedienung über den Bildschirm Ihres Smartphones.
Schalte die volle Superkraft frei
Halten Sie Ihr Cardo-Kommunikationssystem mit der neuesten Firmware auf dem neuesten Stand. Als Teil unseres Engagements für unsere Fahrer verbessern wir unsere Einheiten ständig.